What Homeowners Describe
We see shallow flakes and patches where the surface has let go, leaving a rougher layer behind. Some spots show aggregate, and the edge of each patch is slightly raised. Tap the surface and it sounds hollow in places. Water darkens the spalled areas longer than the surrounding wall after rain. The pattern is patchy rather than even, and the edges catch a fingernail. The bare layer underneath feels gritty.
What Is Usually Happening
Gunite is applied as a shell, and its surface depends on a sound outer layer. Water that gets behind that layer pushes it off in flakes. Once the surface is open, more water enters, and the process repeats inward. The shell is still there, but the protective face is being lost in pieces. Water works at the thin spots first.
What It Does to the House
Spalling leaves the wall open to water and weather. Each patch lets in more moisture, the surface gets rougher, and the wall becomes harder to coat or seal. Left alone, the loss works deeper into the shell. Repainting over a flaking wall wastes the coating.
What It Means for the People Inside
Open, damp concrete can hold moisture against the structure, and damp surfaces may support mold in nearby enclosed spaces. Falling flakes also leave debris that can clog drains. Dust from the flakes can settle indoors.
The Next Step That Saves Money
Have the surface sounded and the loose material removed, then repair the spalled areas and recoat so water sheds instead of soaking in. Any coating applied over loose material will lift again in a short time.
EcoSpect works across the Finger Lakes and Central New York, including Steuben County, Tompkins County, Wayne County, Yates County, Cayuga County. If you are outside these counties, call (855) DRY-BSMT and we will confirm coverage.
What People Search Next
- gunite spalling
- gunite flaking
- concrete shell spalling
- gunite repair
- hollow gunite
- gunite resurfacing
- concrete spalling